Brandtech-scientific Transferpette-8/-12 electronic Manual de usuario descargar pdf (Pagina 49)

➞

English

Press the pipetting key once

to discharge the liquid. The

arrow in the display points

downwards (discharge).

No action required!

When pipetting in the PIP

mode the blow-out function

is performed automati-

cally.

6. Discharge liquid

7. Start blow-out?

Press the ENTER key. The

display shows ‚blo‘

for blow-out.

1. Bring up the

blow-out function

Press the pipetting key

once to initiate the blow-out

process. The display moves

back to the start position of

the selected pipetting mode.

2. Start blow-out

Start blow-out manually

The blow-out function can, if necessary, be initiated manually

at any time.

PIP Mode

What to do How to do it Keys to press Display readout

To accomplish the blow-out, the pistons move to the lowest position.

The user must be certain that any residual liquid is discharged safely.

If the pipetting key is pressed and held, the pistons will be maintained

at their lowest position to avert an accidental aspiration of liquid.

When the key is released, the pistons return to the start position

Note:

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 183 184

Sin comentarios

Brandtech-scientific Transferpette-8/-12 electronic Manual de usuario Pagina 49