
➞
➞
➞
Z
➞
➞
➁
➂
➃
➄
46
for cleaning or replacing
Removing of pistons
Disassembling the Manifold
1. Disconnect the manifold from the
handle.
2. Turn both closures of the manifold
housing cover 90° (e.g., using a coin)
and slide off the housing.
3. Remove both outer Phillips screws on
the nose cone assembly.
Do not loosen the central guide
rod (Z)!
Attention:
4. Pull the piston and nose cone as-
sembly apart and separate. Remove
stroke springs.
5. Place the mounting tool on the pis-
ton nut and unscrew the piston nut.
Comentarios a estos manuales